SportsPlay Zack 911-131, Manual

Page: 3 / 50

Page 3
Tool and Material Checklist
•
To dig holes, the best method is a tractor with an auger.
Use a 12” auger bit. No matter what you use, there will
be a considerable amount of hand digging as well
•
Shovels, long handled spades
•
Post hole diggers
•
Wheelbarrows
•
Large construction bar (generally 5’ long).
•
Spray paint, to mark ground holes
•
Pry bar
•
Claw hammers
•
Large dead-blow rubber hammers
•
Small (3lb) Sledgehammer, to use in blocking the posts
•
7/32”, 3/6”, 1/8” Allen wrenches: These are very
important. Several different types are helpful (socket
style, small “L” arm, wrench styles etc.)
•
Vise grips, large, regular and needle-nose
•
3/4” and 1/2” and 9/16” sockets, both 1/2” and 3/8”
drives
•
6’ and 8’ stepladders, strong ones
•
Extension cords (also duplexes to run more than one
cord)
•
1/2” drill and 3/8” drill
•
1/2” and 1/2” drill bits and 1/2” spade bits
•
Levels: magnetic torpedo, 4’ long etc. (as many as
possible)
•
Shims and blocks from scrap lumber and a saw to cut
sizes on site
•
Small, skinny, flat shims are helpful in raising posts etc.
2” by 4” and 2” by 6” and Plywood are also helpful
•
Pencils and markers
•
String line
•
Bar clamp 4’
•
Sometimes bracing material is helpful (2” x 4” x 6’
studs with sturdy lag bolt/nut combinations)
•
Files, sandpaper, wood scraps
•
Stones
•
Cement
•
Surfacing
•
One brick per post