SportsPlay Ray 2, Manual

Page: 34 / 41

Page 34
Corkscrew Climber Plan:
The Corkscrew Climber attaches to the deck from an arch wall.
INSTRUCTIONS:
•
Install the arch wall on the “deck side” of the posts with
pole attachment stub facing outward.
•
Attach the Corkscrew Climber to the arch wall. (See
detail C) Be sure to maintain the same width between
the top and bottom of the arch entry opening.
•
Make sure all gaps (between walls and posts and deck)
are less than 3 1/2”.
•
Install Corkscrew Climber 19” out from the deck.
SPECIFICATIONS:
Event: Corkscrew Climber is constructed of Type #4 steel
welded to 24” diameter by 1 5/8 O.D. coil. Angle plate
connects to deck. 1” outer diameter handholds are welded to
support.
Paint shall be electrostatically applied oven cured powdercoat.
Hardware: Stainless steel tamper resistant
MAINTENANCE:
Touch up any marred paint surfaces.
Periodically check hardware for integrity and tightness.