background image

902-289 6’ Spiral Slide

 

Page 

1

 

Rev. 07/22/03

 

SportsPlay Equipment, Inc., 5642 Natural Bridge, St. Louis, MO 63120  (314) 389-4140 

IMPORTANT 

 

PLEASE READ THESE INSTRUCTIONS BEFORE COMMENCING ASSEMBLY.  All equipment 

must be installed in accordance with these instructions.  Check your shipment 

against Bill of Lading and Parts list.  Any missing or broken parts must be 

reported to your distributor within 10 days of receipt of your order.  When 

properly installed and maintained, equipment will give many years of Safe, 

Trouble-Free use.  Periodically check for loose or broken parts.  Loose bolts 

must be tightened and broken parts must be replaced as they can possibly 

create dangerous situations leading to unnecessary accidents.  Resilient 

Surfacing should be used under all playground equipment.  Appropriate 

publications, available at no charge, from the Consumer Product Safety 

Commission, include “A Handbook for Public Playground Safety”.  You can 

receive your free copy by calling 1-301-504-7908. 

 

 
 

 
 

 
 
 

 
 

 
 

 
 
 

 
 

 
 

 

PACKING LIST HARDWARE 

BAG 

 

Hardware Bag 

2

126-701 

3/8” x 1 ¼” Button Head Bolt 

435-623 

6’ Spiral Slide 

11

126-702 

3/8” x ¾” Button Head Bolt 

12 

903-001 

Pipe Clamp 

2

226-602 

3/8” Nylon Insert Lock Nut 

903-002 

Deck Clamp 

15

316-601 

3/8” Flat Washer 

903-141 

Spiral Slide Z Bracket 

1

805-532 

Warning Label 

903-214 

T Slide Leg 

1

805-534 

SportsPlay Label 

903-286 

Slide Center Support 

1

 

Maintenance Checklist 

903-306 

Arch Entry Panel 

 

 

1 903-324  Step 

Leg 

 

 

2 903-327  Hand 

Rail 

 

 

1 905-710  Triangle 

Deck 

 

 

905-712 

6’ deck steps 

 

 

3 913-112  Post 

12’6” 

 

 

913-115 

Slide Guard 48” 

 

 

913-117 

Ten Rung Wall 

 

 

 

 

 

 
 

1 SKID 

1 SLIDE 

2 TOTAL PCS 

1201 # Weight  

Class 70 

 

Summary of Contents for 902-289















Reviews: