4
3
2
1
SINGLE SIDE BIKE RACK (Port)
SINGLE SIDE BIKE RACK (Port)
SINGLE SIDE BIKE RACK (Port)
SINGLE SIDE BIKE RACK (Port)
5
802-176
802-176
802-176
802-176
Check MONTHLY for loose bolts, damaged or broken parts.
Tighten and/or replace immediatly.
GENERAL MAINTENANCE INSTRUCTIONS:
GENERAL MAINTENANCE INSTRUCTIONS:
GENERAL MAINTENANCE INSTRUCTIONS:
GENERAL MAINTENANCE INSTRUCTIONS:
GENERAL ASSEMBLY INSTRUCTIONS:
GENERAL ASSEMBLY INSTRUCTIONS:
GENERAL ASSEMBLY INSTRUCTIONS:
GENERAL ASSEMBLY INSTRUCTIONS:
Check all the parts and hardware with the packing list to be sure you
have received everything needed to assemble this product.
CONTACT YOU LOCAL DISTRIBUTOR WITH NOTIFICATION OF
ANY MISSING OR DAMAGED PARTS. Contact must be made with-
in ten days of receipt of your order.
Only hand tighten nuts & bolts on initial assembly. Final tightening
should be done EVENLY after final assembly when unit has been
plumbed and leveled.
After assembly is complete, ANY ENDS OF BOLTS PROTRUDING
BEYOND NUTS SHOULD BE CUT OFF/OR PEENED OVER TO
REMOVE ANY SHARP PROJECITONS. Go over entire unit to file
smooth any sharp edges or projections that may have been caused
by rough bolt connections. In many situations only one bolt is
required. See specific assembly instruction.
On products with platforms install 1 - 2 degrees off level to
facilitate water drainage.
SPECIFIC ASSEMBLY INSTRUCTIONS:
SPECIFIC ASSEMBLY INSTRUCTIONS:
SPECIFIC ASSEMBLY INSTRUCTIONS:
SPECIFIC ASSEMBLY INSTRUCTIONS:
Completely assemble bike rack.
1.
Position bike rack in proper position, mark footing holes, move
2.
bike rack to tone side, and dig holes.
Assemble anchor bolts to end supports and place bike rack in
3.
position over footing holes.
Pour concrete and wait 48 hours befor using equipment.
4.
