July 20,2012
6
602-763I 6’ Single Covered Bench w/ Back Inground Mount
INSTALLATION INSTRUCTION
BEFORE YOU BEGIN
In addition to the components on the packing list you will need a
tape measure, post hole digger, blocking material, and a level.
INSTALLATION STEPS
__1)
Review all instructions before beginning:
__2)
Unpack, organize, and identify all components:
Be sure to
place all painted components on a protective surface (cardboard,
cloth, etc…) to prevent damage.
__3)
Locate placement of the
6’ Covered Bench:
See top down
view of your instruction booklet.
__4)
Layout the holes for the Cantilever Legs for Covered
Bench:
Refer to the footing diagram provided in this instruction
booklet to see how far apart to dig your footing holes.
__
5) Assembly:
After you have dug your footing holes, the next
step is to assemble the Covered bench. To assemble you will need
all parts listed in this instruction booklet. First you will bolt your 6’
Beveled Edge Perf Benches (1) to the Cantilever Leg for Covered
Bench (3) using the 3/8” x 1
¼
” Button Pin SS Bolts (6), 3/8” Flat
Washers (8), and the 3/8” Nylon Insert Lock Nuts (7) that are
provided, make sure when you are bolting the benches to the legs
that the mounting brackets for the benches are facing outward or
away from each other (See Detail A). Once the benches and legs
are bolted together you will then bolt the Frame for 6’ Single Sided
Cover Top (4) to the Top for Single 6’ Covered Bench (3) using the
3/8” x 1
¼
” Button Pin SS Bolts (6) and the 3/8” Flat Washers (8)
provided. To bolt the frame to the top you will place the frame
