July 20,2012
5
602-763I 6’ Single Covered Bench w/ Back Inground Mount
INSTALLATION INSTRUCTION
SPECIFICATIONS
Paint
–
Electrostatically applied & oven cured powder coat
Hardware
–
Stainless steel & tamper resistant
Tube –
3” x 3” Square Tubing
Sheet Metal –
12 gauge HRPO steel
Thermoplastic coating
INSTALLATION TIPS & TROUBLE SHOOTING
Apply locktite to all bolts during assembly prior to
completely tightening them.
Stainless Steel hardware can occasionally be difficult to use
particularly if you need to take them out to make an
adjustment. It is recommended that you add a drop of oil to
bolts that may have to be removed before you install them.
Do not tighten bolts all the way until the unit is completely
assembled and all components are square and level.
Identify and separate all parts by referencing the detail
drawings and the parts list.
As you unpack and separate the components use the
cardboard sheets that were used for packing and shipping to
prevent damage to the components. This is particularly true
all Powder Coated and Thermoplastic coated components,
by setting the components on top of the cardboard.
