302-141 Rabbit Hutch (Portable)
Page
2
of 3
Rev
02/20/2020
GENERAL USE/FALL ZONE & FOOTING RECOMMENDATIONS
Stationary & Portable equipment – Use/Fall Zones should extend a minimum of 6 feet in all
directions from the perimeter of the equipment ground space. This area should be covered with the
required amount of resilient safety surfacing material. For some equipment – Use/Fall Zones can
overlap. See Consumer Product Safety Commission Guidelines.
Diameter & Depth of footings illustrated are satisfactory in most applications for pipe sizes up to
2 3/8” diameter. Varying soil & climatic conditions may require deeper & heavier footings in some
areas. Check local building codes.
* If resilient surfacing is to be less than 12”, then additional pipe should be put in concrete to
maintain proper finish grade for equipment.
USE AREA & FOOTING LAYOUT: