Fig 3
Fig 5
Fig 2
Fig 1
Fig 4
Fig 6
Fig 7
Fig 8
ASSEMBLY INSTRUCTION
WARNING: BE PREPARED FOR TEAM LIFT WHEN ASSEMBLING/MOVING HEAVY TABLE.
WARNING: SHARP EDGES CAN CAUSE INJURY. USE CAUTION WHEN
ASSEMBLING/MOVING TABLE.
WARNING: DO NOT SIT OR STAND ON TABLE OR SHELF.
WARNING: MAKE SURE CASTERS ARE IN LOCKED POSITION BEFORE USE.
1. Place the under shelf on it’s side on the floor.
2. One by one, insert each leg into the corner socket of the under shelf
［
Fig.1
］
3. Use set screws to loosely attach the under shelf to the legs, approx. 7 inches from floor.
［
Fig.2
］
4. Screw the castors into the end of legs
［
Fig.3
］
, then stand upright
［
Fig.4
］
5. Position the table top onto the legs, ensuring each leg is firmly located in its corresponding corner
socket of the table top.
［
Fig.5
］
6. Attach the table top using set screws. Ensure the table top is level and securely fixed.
［
Fig.6
］
7. Securely tighten all set screws before use.
8. Lift the lever up to unlock the casters for transport
［
Fig.7
］
, then press the lever down to lock the
casters during use
［
Fig.8
］
.
Safety Tips
·
Use caution when cleaning or handling to prevent risk of injury from exposed metal edges.
·
Do not overload the table or shelf.
Cleaning
·
Before use, remove protective film then clean the table.
·
Clean the table using a cleaning agent suitable for use with stainless steel and galvanized surfaces.
·
Always remove cleaning agent residues, as this can discolor the surface.
·
Never leave any surface damp as this may cause discoloration. Wipe dry thoroughly.
201903
