SPORTSBEAMS LIGHTING, INC.
4.
1.888.905.6680 | WWW.SPORTSBEAMS.COM
INSTALLATION & AIMING
ATTACHING FIXTURES
HARDWARE PROVIDED
The Sportsbeams Chromabeams LED 800 Fixture can be mounted on top of a mounting structure or underneath. The
mounting structure may be a light pole cross arm, an indoor catwalk bracket, or other structural component that will
hold the fixture firmly in place and ensure enough clearance to adjust fixture for the correct beam angle. This fixture
is designed to be mounted and aimed in accordance to a proper light design to ensure consistant light coverage.
It is the responsibility of the installer to verify that all proposed mounting structures including poles, cross arms, catwalk brackets, and
other mounting structures are certified to support the weight of the fixture, withstand wind loads, and meet all other applicable codes and
regulations. FAILURE TO FOLLOW THIS WARNING MAY LEAD TO DEATH, SEVERE INJURY, OR PROPERTY DAMAGE.
Do not suspend any fixture by electrical or control wires, as these will not support the weight of the fixture, resulting in the potential for the
fixture to fall and cause damage or injury. FAILURE TO FOLLOW THIS WARNING MAY LEAD TO DEATH, SEVERE INJURY, OR PROPERTY
DAMAGE.
An impact driver may be used on mounting hardware while the power is off, but vibration caused by power tools may
damage the fixture. FAILURE TO FOLLOW THIS WARNING MAY LEAD TO FIXTURE INTERNAL DAMAGE AND FAILURE.
Fixtures mount to our custom poles or provided adapter
plates via four M10 bolts.
Each fixture will contain the following hardware:
QTY
DESCRIPTION
4
M10 COURSE THREAD BOLTS
4
M10 FLAT WASHER
4
M10 SPRING LOCK WASHER
4
M10 HEX BOLT
PICTURE
4 x M10 bolts fix the base
plate to the cross arm