SPORTSBEAMS LIGHTING, INC.
15.
1.888.905.6680 | WWW.SPORTSBEAMS.COM
CONTROL SYSTEM OVERVIEW
INSTALLATION & AIMING
1. USER SENDS COMMAND TO
FIXTURE
DETAILS: Using our provided
10-Key button pad, the user can
change up to 10 different scenes.
For example: All on, all off, 75%,
dim up, dim down, etc.
The 10-button pad is connected to
our Facility DMX computer in our
Network Box.
TRACK ONLY
25%
TRACK ONLY
ON
75%
FIELD ONLY
DIM UP
DIM DOWN
50%
25%
OFF
2. NETWORK RECEIVES COMMANDS
AND DISTRIBUTES TO FIXTURES
DETAILS: This box sits indoors
(press room, ticket booth, etc).
110V power is attached to the top
breaker. The routers and DC
transformer are mounted on DIN
rails along with our Facility DMX
computer.
4. FIXTURE RECEIVES COMMANDS
AND RESPONDS INSTANTLY
DETAILS: Each fixture has its own
MAC address. An ethernet cable is
run from each fixture to the switch
inside the control box.
3. POWER BOX CAN RECEIVE
COMMANDS FOR FULL POWER
ON/OFF
DETAILS: While most lighting
commands will occur through
the Network box, full power
control utilizing the individual
breakers and digital switches
takes place in the Power box.
Power Over Ethernet (POE)
cable to receiving antenna.
Power Over Ethernet (POE)
cable to transmitting dish.