17
STEP 9
Install the Cable
(a). Remove the screws (37) from the cable ball on the connector assembly
pulleys (A12) (A13).
(b). Start from the bottom end of the connector assembly pulleys (A12) (A13)
follow the direction of the arrows to install the cable. (Note: Make sure the
cable goes through the pulleys).
(c). Once the cable went through all of the pulleys, use screws (37) to secure
the cable ball on the connector assembly pulleys (A12) (A13). Use the same
procedure to install the other side. (Note: if adding more optional weights,
pulled up the adjustment pulley assembly and lock at the highest point)
