Assembly - Seat/Pedal Proximity
The seat position on C520R can be adjusted to suit people with different leg lengths.
The seat position can be altered in two ways: An automatic gas spring moves the
seat within a set range; and the placement of the gas spring's connection to the
frame changes the range of movement. The frame has front and back holes.
Connecting the gas spring at the front hole makes the seat closer to the display.
Connecting the gas spring at the rear connection point makes the seat farther from
the display. Tall people would probably prefer a set up with the gas spring connected
at the back hole. This is the position set at the factory.
To adjust the proximity of the seat to the pedals, follow the instructions below.
Automatic Adjustment
To use the automatic seat adjustment (gas
spring activated), sit on the seat and hold
up the handle marked A in the illustration.
Push against the pedals and/or handle to
move the seat back, or simply let the seat
move forward to bring it close to the
display. Once the seat moves to the
desired position, release handle A. The
seat will stay at that position.
Connection Point Adjustment
Follow the instructions below to change
t he
ga s
sp ri n g c o n ne c ti o n p o i nt .
Connecting the gas spring to the front hole
will place the pedals closer to the display.
First, prop up the back of the bike as
shown.
9
Front hole
Back hole
