18
STEP 12
Establish the Number of Units per Pod (Cont.)
The previous (or default) number of units per pod will appear in the setting
value screen, and the following message will appear in the dot matrix screen:
“ENTER NUMBER OF CARDIO PRODUCTS CONNECTED”.
a. Press ▲/▼ keys or numeric keys (0 through 9) to input the number of
products in the pod.
b. If desired, press the CLEAR key to reset all values to zero.
c. After the correct number of units in the pod has been entered, press the
ENTER key to commit the number to the product memory. After the ENTER
key has been pressed, the unit-per-pod setting mode will end.
d. If desired, press the STOP key at any time to exit this mode and maintain
the previous setting.
At this point, the Green System is ready for use.
STEP 13
Install the CES, if Desired
The G862 elliptical trainer can operate with the CardioActive™ Entertainment
System, an integrated TV module. If desired, install the integrated TV module
after the elliptical trainer is fully assembled. For more information, please
refer to installation instructions for the CardioActive Entertainment System.
Summary of Contents for G862
Page 42: ...41...
