Installation Instructions – Continued
14.
Re-install the vehicle’s seats and attach the connector which you secured underneath the seat with the
connector pulled up through the carpeting. Make sure to securely re-bolt the vehicle’s seats to the vehicle’s floor.
15.
At this point connect the seat heater lead wires to the previously identified safe power source and secure a
good ground base.
16.
Make sure to connect your battery terminals and start your ignition.
17.
Press the seat heater switch to the upward position for a desired high setting. The middle setting is the Neutral
or “OFF” position. Press the switch down to the lower position to engage the Low temperature setting.
Caution:
If at any time you feel that the seat heaters are too hot or causing dizziness due to overheating please
turn off the seat heater and / or take your vehicle to the side of the road and carefully exit the vehicle and wait to
regain composure. If you feel that the seat heaters are malfunctioning please consult with your Professional
Installer.
01 Apr 200
1
SIL-03/
SIL-04/SIL-05
© Sports Imports LLC – Rockville MD – USA Fax. (301) 468-5852
6
Summary of Contents for Carbon fiber Twin Heating Pads
Page 1: ......
