12. PROPER PLACEMENT AND MOVING OF VAULT
11
13. SECURING YOUR VAULT
1.
2.
SECURING YOUR VAULT WITH PROVIDED CABLE AND NUT
A security cable is included with
your vault. To secure the cable
around a fixed object, first loop
the cable around the object as
shown in the figure to the right.
Insert the threaded end of the cable
into the notch on the backside of
the vault while still open.
3.
From the inside of the vault, take
the provided nut and thread onto
the cable until fully secured.
1. To maximize burglary protection and stability, securing the vault to the floor or
table is recommended.
2.
3.
Always ensure the vault is in an isolated and dry area. Never place the vault in
direct contact with a wet floor. When installing your vault on a concrete floor,
use of a moisture/protective barrier is highly recommended. Failure to do so
or exposing the vault to chemicals or other adverse environments may void
the warranty.
SA Consumer Products recommends that you store your vault in a closet, office,
basement, bedroom or any other location that is convenient for you but out of
direct line of sight from prying eyes.
St
ep 1
St
ep 2
VAULT
INSIDE
INSIDE OF VAULT,
THREAD NUT
ONTO CABLE
