background image

7

6. OPENING VAULT WITH PROGRAMMED FINGERPRINT

7. PROGRAMMING ADDITIONAL FINGERPRINTS

INDIVIDUALLY MAPPING ALL

ZONES OF YOUR FINGERPRINT

WILL ENSURE A RELIABLE

READING BY THE SCANNER.

To ensure each programming 

sequence is properly captured, it 

needs to read the exact same place 

on your finger four times in a row, 

once successful you can move onto 

the next zone of your fingerprint. 

This counts as one programmed 

fingerprint of 100 fingerprints this 

unit can keep in memory.

Once programming sequence has 

been successfully completed, you 

can move onto the next zone of your 

fingerprint.

TIP

RIGHT

TOP

MIDDLE

LEFT

If your fingerprint is not accepted:

x

 1

x

 1

FLASH

x

 5

x

 5

RED 

LIGHT

INDICATOR RING

TRY AGAIN

REPROGRAM

With keys in hand, close the door. Place and 

hold the PROGRAMMED finger on the scanner, 

indicator ring will illuminate green and vault 

door will open.

When accessing your vault quickly, there is a chance you might press 

the scanner with a part of your finger that you have not registered before. 

For this reason, we recommend programming additional areas of your 

fingerprint to ensure fast and reliable entry to your vault.

Indicator ring will flash 1 time 

and sound 1 time. This means 

the scanner did not read your 

fingerprint (try again).

If you see 5 red flashes with 5 

sounds, the scanner read your 

fingerprint but did not accept it. 

Follow section 6 to reprogram 

your fingerprint.

Summary of Contents for SA-HD4

















Reviews: