9. CLEARING ALL PROGRAMMED FINGERPRINTS
9
8. TROUBLE SHOOTING (CONTINUED)
Locked Out Of Your Vault
In the event you are locked out your vault, use your backup keys to gain access and
follow the section 3 Initial Entry instructions.
If you have lost your backup keys, or are still having any difficulties, contact customer
service at the number below. Proof of purchase is required to obtain keys.
SOLUTION
x
2
x
2
RED
LIGHT
NOTE: If 100 max fingerprints have already been programmed
indicator ring will flash
5 times and beep 5 times. We recommend clearing all programmed fingerprints and starting
the programming process over.
Hold reset button for 5 seconds, the
keypad flashes twice and will beep twice.
Battery
Compartment
(4) AA
Reset Button
LED Light
Contact Customer Service at [email protected] or (888) 792-4264
Make sure to hold down your finger on the scanner
instead of tapping, as the scanner needs time to
complete the scanning process.
Fingerprints may lack definition due to excessive dryness.
We recommend applying moisturizer or slide your
fingerprint against your forehead before scanning
process.
Pressing and releasing the reset button will not erase
fingerprints already recorded. It simply places the
scanner in programming mode to allow for additional
fingerprints to be programmed. This unit will hold up
to 100 unique fingerprints.
SOLUTION
PROBLEM
YOUR FINGERPRINT IS NOT
READING
WILL PRESSING THE
RESET BUTTON CLEAR
THE MEMORY