![background image](http://html1.mh-extra.com/html/sports-afield/preserve-biometric-series/preserve-biometric-series_instruction-manual_1350217007.webp)
5. INTIAL ENTRY (Continued)
6. PROGRAMMING YOUR FINGERPRINT
6
2. PLACE AND HOLD the pad of your
finger on the scanner until indicator
ring flashes green once and beeps
once.
3. REPEAT at least 3 more times until
there are 2 consecutive beeps and
2 green flashes.
BEEP
BEEP
BEEP
HOLD FOR BEEP
LIFT FINGER
St
ep 2
St
ep 3
2 BEEPS + 2 GREEN FLASHES = SUCCESS!
GREEN LED
GREEN LED
St
ep 1
5.
Locate the (4) AA batteries
and insert in the battery
compartment on the inside
of the door panel. Unit
will beep when batteries
are successfully installed.
Replace battery cover.
WARNING: The batteries must be inserted with the correct polarity. Exhausted batteries must be removed from
the product and discarded safely. Do not mix old and new batteries. Do not mix alkaline or standard (carbon –
zinc) batteries. Do not use rechargeable (nickel – cadmium) batteries.
St
ep 5
NOTE:
Programming mode will time
out after 10 seconds of
inactivity. If this occurs press
reset button and begin again.
1.
On the inside of the safe, near
the battery compartment, locate
the brass cap. Unscrew and
remove the cap. Press and release
the reset button. The indicator
ring will illuminate indicating the
safe is now in programming mode.
*Keep safe door open while
programming new fingerprint*
Battery Holder
AA
AA
AA
AA
Red Reset Button
Brass Cap