OM_GS_0218
www.sportsafieldsafes.com
14
NOTE: The batteries must be inserted with the correct polarity. Exhausted
batteries must be removed from the product and discarded safely. Do not mix old
and new batteries. Do not mix alkaline or standard (carbon – zinc) batteries. Do
not use rechargeable (nickel – cadmium) batteries.
17
SANCTUARY
SERIES
E-LOCK
SECURITY
CODE
SETUP
IMPORTANT: It is necessary to re-program your safe with a new security code
you have personally selected to provide maximum household security.
BE CAREFUL IN CHOOSING YOUR SECURITY CODE. YOU’LL WANT TO BE SURE
THAT YOU CAN OPERATE THE UNIT QUICKLY WITHOUT MAKING AN ENTRY
ERROR.
1.
To program your new security code, press the [ 0 ] button six times followed by
the [ * ] symbol. Two beeps indicate that the entry is valid.
2.
Key in the preset factory code [ 1 5 9 # ]. The yellow light on the E-lock will
illuminate so that you can enter your new code. You can only enter a new
code while the yellow light is on. (If you are changing the code, enter the last
security code used)
3.
Enter your new 3 to 8 digit security code followed by the [ * ] symbol. One
beep indicates that the entry is valid.
4.
Re-enter your new 3 to 8 digit security code followed by the [ * ] symbol. Two
beeps indicated that the entry is valid.
5.
Confirm your newly entered security code by entering the 3-8 digit code
followed by the [ # ]. If successful you will hear two beeps and the green light
illuminates.
6.
DO NOT shut the safe door until you have confirmed your new security code at
least 3 times to insure the code has been saved and you can lock and unlock
the door successfully.
7.
If the code fails, you will hear three beeps. Repeat the steps above until
successful.
IMPORTANT: If the incorrect security code is entered 3 times you will have an
automatic lockout for 20 seconds before you can try your code again. If 3
additional failed attempts are made, the keypad will lockout for 10 minutes.
18
SANCTUARY
SERIES
E-LOCK
QUIET
MODE
1.
To mute the E-Lock, enter the code [ * 6 3 3 ]
2.
To turn the sound back on, enter code [ * 6 6 ]
