OM_GS_0218
www.sportsafieldsafes.com
9
4.
Locate the single spoke in the plastic bag hanging on the front of the safe and
attach it to the spindle hub, turning clockwise until snug. Gently turn the
handle clockwise until the locking bolts are retracted and you can open the
safe door.
5.
Inside your safe is a small box containing the remaining spokes for safe handle.
Remove the spokes from the packaging and thread into the respective holes on
the spindle hub.
NOTE FOR DROP HANDLE LEVERS: Your handle is installed at the factory and
requires no action on your part.
8
GENERAL
E-LOCK
BATTERY
INSTALLATION
IMPORTANT: The first time you open your safe you will need to use the override
key. Once the safe is opened, the batteries can be inserted. The batteries are in
the plastic bag with this manual.
1.
The E-Lock on the Sports Afield Haven, Preserve, Tac LZ and Journey Series
require 4 x AA alkaline batteries
2.
Open the battery compartment located on the interior of the door towards the
upper hinge
3.
Insert the batteries in the proper orientation and order
4.
Close the battery compartment door. Always ensure you are using new, brand
name batteries with full charge.
NOTE: This E-Lock is equipped to alert you when the batteries are low by
illuminating the red and green light on the keypad when any button is pressed.
Always test the batteries when installing or replacing. If the red and green lights
on the lock face turn on when a button is pressed, you know the batteries are not
fully charged.
NOTE: The batteries must be inserted with the correct polarity. Exhausted
batteries must be removed from the product and discarded safely. Do not mix old
and new batteries. Do not mix alkaline or standard (carbon – zinc) batteris. Do
not use rechargeable (nickel – cadmium) batteries.