14
15
Cardio 660
Heart rate Monitor
settIng personal profIle
1.
select Gender by
pressIng s/s/r or l/v
.
set and advance by
pressIng Mode
.
2.
adjust year of Birth by
pressIng s/s/r or
l/v
. set and advance by
pressIng Mode
.
3.
select Units of Measure (imperial=lB
or Metric=KG) by
pressIng s/s/r or l/v
.
set and advance by
pressIng Mode
.
4.
adjust Height by
pressIng s/s/r or l/v
.
set and advance by
pressIng Mode
.
5.
adjust weight by
pressIng s/s/r or l/v
.
set and advance by
pressIng Mode
.
6.
select fat Burn Zone on or off by
pressIng s/s/r or l/v
. set and advance
by
pressIng Mode
.
7.
adjust lower fat Burn Zone range by
pressIng s/s/r or l/v
. set and advance
by
pressIng Mode
.
note:
this is a % of Max Heart rate (automatically
calculated by the monitor).
8.
adjust Upper fat Burn Zone range by
pressIng s/s/r or l/v
. set and advance
by
pressIng Mode
.
9.
adjust display contrast by
pressIng
s/s/r or l/v
. set by
pressIng Mode
. the
display will read “saved!”
your sportline cardio 660 is now ready for
use!
settIng tIMe, calendar and user profIle
the sportline cardio 660 uses your personal profile to calculate
information specific to you. the display in the programming se-
quence guides you through the settings. you adjust the informa-
tion being programmed by
pressIng start/stop/reset (s/s/r)
to increase or
lap/vIeW (l/v)
to decrease. you set the informa-
tion and advance to the next field by
pressIng Mode
. the display
reads “saved” when this sequence is complete. the monitor is
then ready for use. you may exit the Programming sequence at
any time by
pressIng & holdIng
the
Mode
key.
press & hold
the
Mode
key in time of day
mode to enter the Programming sequence.
settIng tIMe & calendar
1.
adjust Hour by
pressIng start/stop/
reset (s/s/r) or lap vIeW (l/v)
. set and
advance by
pressIng Mode
.
2.
repeat step 1 to set Minutes, seconds,
Month, day and year.
3.
select 12- or 24-hour time format by
pressIng s/s/r or l/v
. set and advance
by
pressIng Mode
.
4.
select Key tone on or off by
press-
Ing s/s/r or l/v
. set and advance to
personal profile by
pressIng Mode
.
programming The moniTor
programming The moniTor
increase:
s/s/r
decrease:
l/v
set & advance
to next setting:
press Mode
increase:
s/s/r
decrease:
l/v
set & advance
to next setting:
press Mode
increase:
s/s/r
decrease:
l/v
set & advance
to next setting:
press Mode