10
11
Cardio 660
Heart rate Monitor
1.
press
the button on the chest
strap transMItter
to select alternate
channel
2.
while wearing the chest transmitter
strap,
press
the
heart rate
key to
enter Heart rate/exercise mode.
3.
press & hold
the
heart rate
Key.
“learn” will appear in the top line of the
display.
4.
when the monitor and chest strap
transmitter are successfully paired,
“coded” will appear in the monitor’s
display.
the sportline cardio 660 features a coded chest strap trans-
mitter with multiple channels to eliminate interference from
other heart rate monitors when exercising in close proximity to
other people, such as a group fitness class. the monitor and
chest transmitter strap are already coded and paired. if you are
experiencing interference and need to select an alternate code,
follow these steps:
the chest strap transmitter provides constant heart rate
information throughout the duration of your workout. to ensure
a proper heart rate display, the chest transmitter must be prop-
erly adjusted. snap the plastic tabs at the end of the elastic belt
into the holes at the end of the transmitter and adjust the strap
so that the transmitter fits tightly below the pectoral muscles,
as shown in the drawing.
note:
Users with significant chest hair may have a problem obtaining
contact between the transmitter electrodes and their skin, resulting in poor
performance. it may be necessary for these individuals to shave the area of
their chest beneath the transmitter.
note:
in dry and cold climates it may take a few minutes for a layer of
perspiration to form between the chest strap and the skin. Moistening the
electrodes with saliva or ecG conductive gel can speed up this process.
coding The chesT sTrap TransmiTTer
Wearing The chesT sTrap TransmiTTer
electrodes
2
4
1
press button