WWW.SPORTDOG.COM
15
TOGGLE DOWN:
MODE
UPPER BUTTON
FUNCTION
LOWER BUTTON
FUNCTION
SIDE BUTTON
FUNCTION
TOGGLE
SWITCH UP/
DOWN
NUMBER OF
DOGS
V/T ON
DIAL
1
Dog 1/4
Dog 2/5
Dog 3/6
Dog 1-3/
Dog 4-6
6
Tone
2
Dog 1/4
Dog 2/5
Dog 3/6
Dog 1-3/
Dog 4-6
6
Vibe
MATCH THE COLLAR RECEIVER AND REMOTE TRANSMITTER
To match the Collar Receiver to work with a new Remote Transmitter or to match a new Collar Receiver
to work with your existing Remote Transmitter:
A. Turn the Collar Receiver off.
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off after 4-5
seconds. If the On/Off Button is released too early, the Receiver Indicator Light will begin fl ashing as
normal. If this occurs, start over from
A
.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light
fl ashes 5 times. Once the Receiver Indicator Light has fl ashed 5 times, the Collar Receiver has been
matched and will begin fl ashing as normal. If the Receiver Indicator Light does not fl ash 5 times,
start over from
A
.
PROGRAM THE SYSTEM FOR TWO-DOG OPERATION
SportDOG
™
Collar Receivers can be set to respond to either the
up
or
down
toggle switch position.
A SportDOG Add-A-Dog
®
Collar Receiver must be purchased to train a second dog in two-dog mode.
Please refer to the back cover for compatible Add-A-Dog Collar Receivers for this system.
1. Program the Remote Transmitter to mode 1, 2, 3, 6, or 7 in the toggle
black/up
position (see page 14).
2. With the toggle switch in the
black/up
position, program the
fi rst Collar Receiver:
A.
Turn the Collar Receiver off.
B.
Press and hold the On/Off Button. The Receiver Indicator Light
will come on, then turn off in 4-5 seconds. If the On/Off Button
is released too early, the Receiver Indicator Light will begin its
normal
fl ashing. If this occurs, start over and repeat from
A
.
C.
After the Receiver Indicator Light has turned off, release the
On/Off
Button.
D.
Press and hold the Upper Button on the Remote Transmitter
until the Receiver Indicator Light fl ashes 5 times. If the
Receiver Indicator Light does not fl ash 5 times, start over
and repeat from
A.
3. Program the second Collar Receiver the same way using
A
through
D
above, but with the toggle switch to the
orange/down
position.
TOGGLE SET TO BLACK/UP
FOR DOG 1 OR TOGGLE SET TO
ORANGE/DOWN FOR DOG 2
ST
E
P
::
06
ST
E
P
::
07