12
1-800-732-0144
Program the Collar Receiver for Up to
Four-Dog Operation (Mode 1)
SportDOG Add-A-Dog™ Receivers must be purchased to train additional dogs.
1. Program the Remote Transmitter to Mode 1 (see page 10).
2. Flip the toggle switch to the left position.
3. Program the fi rst Collar Receiver:
A. Turn the Collar Receiver off.
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then
turn off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator
Light will begin its normal fl ashing. If this occurs, start over and repeat from A.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the Upper Button on the Remote Transmitter until the Receiver
Indicator Light fl ashes 5 times. You may need to hold both units 2-3 feet from each other.
If the Receiver Indicator Light does not fl ash 5 times, start over and repeat from A.
4. Program the second Collar Receiver using A. through D. above, but using the Lower
Button in place of the Upper Button.
5. Flip to the toggle switch to the right position.
6. Program the third and fourth Collar Receivers using A. through D. above, for both the
Upper (Dog 3) and Lower (Dog 4) buttons.
Step
8
