6
1-800-732-0144
www.sportdog.com
7
Prepare the Collar Receivers
Charge the Collar Receivers
1.
Lift the rubber covers protecting
the Charging Jacks.
2.
Connect one of the charger
connectors to each of the Charging
Jacks.
3.
Plug the charger into a standard
10-volt AC wall outlet.
4.
Charge the Collar Receivers for
4 hours for the first charge.
Recharges take only 1 hours.
Note: The Receiver Indicator Light
will flash after 12 hours of charging.
For the first charge, continue to charge
the Collar Receiver for an additional
12 hours.
Charger connector
placed in Collar Receiver
Charging Jack
5.
When charging is completed, replace the rubber covers.
If the Collar Receiver is used in or around salt water, the Collar Receiver should be
rinsed with fresh water following each use. Prior to rinsing, the rubber charging jack
cover should be removed from the power plug socket and left out until the Collar
Receiver has air dried.
To Turn a Collar Receiver On:
1.
Press and hold the On/Off Button until
the Receiver Indicator Light comes on
and the Collar Receiver beeps 5 times.
2.
Release the On/Off Button.
The Receiver Indicator Light will flash
until the Collar Receiver is turned off. The
flashing light indicates the Collar Receiver
is ready to receive a radio signal from the
Remote Transmitter.
On/Off Button
To Turn a Collar Receiver Off:
1.
Press and hold the On/Off Button until the Receiver Indicator Light comes on and
the Collar Receiver beeps times.
2.
Release the On/Off Button.
To extend the life between charging cycles, turn the Collar Receiver off when it is not in use.
Note: Approximate battery life between charges is 40 hours, depending on frequency of use.
Step
2
