14
1-800-732-0144
matCH tHe Collar reCeIver anD remote tranSmItter
To reset the Collar Receiver to work with a new Remote Transmitter or to reprogram a new
Collar Receiver to work with your existing Remote Transmitter:
1. Turn the Collar Receiver off.
2. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off
after 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light
will begin flashing as normal. If this occurs, start over and repeat from
1
.
3. After the Receiver Indicator Light has turned off, release the On/Off Button.
4. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator
Light flashes 5 times. you may need to hold both units 2-3 feet from each other before this
occurs. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has
been reset and will begin flashing as normal. If the Receiver Indicator Light does not flash 5
times, start over and repeat from
1
.
program tHe Collar reCeIver for two or tHree-Dog
operatIon
SportDOG™ Add-A-Dog
®
receiver(s) must be purchased to train additional dogs.
Please refer
to the back cover for other compatible Add-A-Dog collar Receivers for this system.
1. Program the Remote Transmitter to mode 4 (see pages 12-13).
2. Program the first Collar Receiver.
A. Turn the Collar Receiver off.
B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn
off in 4-5 seconds. If the On/Off Button is released too early, the Receiver Indicator Light
will begin its normal flashing. If this occurs, start over and repeat from
A
.
C. After the Receiver Indicator Light has turned off, release the On/Off Button.
D. Press and hold the
Upper button
on the Remote Transmitter until the Receiver Indicator
Light flashes 5 times. you may need to hold both units 2-3 feet from each other. If the
Receiver Indicator Light does not flash 5 times, start over and repeat from
A
.
3. Program the second Collar Receiver using
A
through
D
above, but using the
lower button
in place of the
Upper button
.
4. Program the third Collar Receiver using
A
through
D
above, but using the
side button
in
place of the
Upper button
.
S
TE
P
::
06
S
TE
P
::
0
7
