www.sportdogbrand.com
13
SD-1200
To use the Add-A-Beeper
™
with your SD-1200 system, make sure the Transmitter
is set to modes 4 or 7.
SD-2400
To use the Add-A-Beeper with your SD-2400 system, simply press the green
button.
________________________________________________________________________
Using the Add-A-Beeper
In normal operating mode (Run Mode or Point Mode), if the Tone Button is
pressed, the Add-A-Beeper goes into Locate Mode. In Locate Mode, at each press
of the Tone Button, the Add-A-Beeper emits the tone once and becomes silent.
To go back to normal mode (Run Mode or Point Mode), press and hold the Tone
Button for 3 seconds until a beep is heard on the Add-A-Beeper. The
Add-A-Beeper will then exit the Locate Mode.
