©2005 KT Sports
FIG. 2
FIG. 2A
FIG. 1
FIG. 1A
FIG. 2B
28
28
27
37
46
44
27
38
45
42
30
29
16
43
39
49
31
32
21
21
31
32
33
21
34
33
35
12
32
21
21
27
34
35
28
30
= 6 X 12 MM
21
= 3.5 X 12 MM
English
English
English - 4
1) Open the carton of your new Turbo Hockey game near where you will play. Select a clear level floor. This
game requires at least two adults to assemble the table.
2) Remove all the contents from inside the carton and verify that you have all listed parts as shown on the
Parts Identifier. We suggest that you use the bottom carton as a clean flat working area to protect the
game. Carefully cut or tear the four carton corners so that the bottom is now your work area.
FIG. 1
3) Raise the Lower End Apron (#27). Turn the partially pre-installed Metal Plates (#29) upright. Attach the
top portion of the Metal Plate to the Lower End Apron with two (#30) Bolts using the 5mm Allen Key
(#16). Tighten securely at this time. Do the same for the other Lower End Apron.
Note: the lower end
FIG. 2
5) Attach the two Apron Corners with Window (#32) to the two End and Side Aprons labeled "PLEASE
ATTACH APRON CORNER (#32) AT THIS SIDE" using eight (#21) Screws on the inside of each apron
corner (inside of the silver plastic piece). Next, attach the two Apron Corners (#31) to the other End and
Side Aprons. See Fig.2.
6) Place one Storage Door (#33) inside the Top Storage Drawer (#34) and attach one Bottom Storage
Drawer (#35) to the Top Storage Drawer (#34) using four (#21) Screws. See Fig. 2B. Then attach the
Drawer assembly (#33, 34 and 35) to the underside of playfield and the Apron Corners with window
(#32) using six (#21) Screws. See Fig.2 and 2A. Do the same for the other Drawer and Door.
ASSEMBLY INSTRUCTIONS:
We recommend that two adults work together to assemble this game.
apron must be placed inside of the molded
plastic connector.
See Figures 1 and 1A.
4) Raise the Lower Side Apron (#28). Turn the
partially installed Metal Plates (#29) upright.
Attach the top portion of the Metal Plate to the
Lower Side Apron with two (#30) Bolts using
the 5mm Allen Key (#16) provided. Pilot holes
show the proper position. Do the same for the
other Lower Side Apron. Now go back and
tighten the bolts securely.
Lower Apron
Mold plastic
connector
SILVER
PLASTIC PIECE
