SPONGE-JET 35E 50E USER MANUAL |
3
1.0
SAFETY
Safety Labels
User
Manual Caution/Danger
Ear protection
Safety Gloves
Hazardous Voltage
Two Man Lift
Protective Earth Ground
Do Not Operate with
Guards Removed
Lockout/Tagout
Eye
Protection
Electrical
Power
Respiratory
Protection
Failure to follow all Instructions in manual and any alterations made to
equipment following shipment from Sponge-Jet will void warranty. Direct
attachment, such as welding or bolting of any additional chutes or hoppers,
etc., to vibrating equipment other than those supplied by Sponge-Jet, Inc.
will automatically void warranty.
Any connection made to unit must be flexible.
Before starting unit, operator must be certain unit is free to follow
movement produced by vibrating parts.
In general, feeding and discharge connections must have sufficient
clearance to prevent any contact.
Before Starting Unit:
The base must have a substantial foundation around entire bottom of the unit
base ring. The base must be secured to floor or adequate support structure
unless on casters. If, after unit has been started, there are secondary vibra-
tions to foundation or to separator base, unit must be reinforced. With further
questions, consult Sponge-Jet, Inc.
Shipping lugs must be removed.
