IP network active speaker User Manual
Network Parameters
Click “network parameters” from the basic settings enter into the network parameters modification interface, it can modify the
following network parameters, select the auto update, if started the version server, the terminal can automatically detect the
current firmware whether it`s latest version or not during login the server, if it`s not the latest version, then it will update to the
latest version automatically.
Device NO.
The only No. to identify host, it can`t repeat with other device or hosts.
Terminal IP
Terminal IP address and port
，
the factory default IP address is 192.168.1.101
Note
：
It can`t revise except with the special situation
（
The default is 2046
）
Subnet mask
The subnet mask of the terminal
Default gateway
The network gateway of the terminal
Preferred DNS server
The preferred domain name interpreter IP of terminal
Alternate DNS server
The standby domain name interpreter IP of terminal
Version server
Version server IP, terminal can connect the version server and auto-upgrade
program when it`s restarting( select the auto-upgrade option)
System server
IP address of IP PA system server
Setting the wireless channel
（
select 2.4G wireless module is available)
Enter into network parameters page and adjust wireless channel to a free channel (1-32 channel)
Language Setting
You can switch Web language between Chinese and English, it will be workable after restarting the web page.
7
