IP network active speaker User Manual
Audio parameters
Enter into the “audio parameters” from “basic setting” can set audio coded format, volume, sampling rate and so on.
Coding mode
Intercom or broadcast code, PCM means uncompressed data, ACPCM
means compressed data( Small amount of network data )
Line input volume
The volume of the audio line input
Line input sound source
IP network active speaker input audio source ( microphone, line input )
Intercom sampling rate
IP network active speaker sampling rate of intercom
（
8000Hz
，
22050Hz
）
Intercom output volume
IP network active speaker total output volume of intercom
（
0~15,6 grade is
0dB
）
Broadcast sampling rate
IP network active speaker sampling rate of broadcasting
（
8000Hz
，
22050Hz
）
Broadcast output volume
IP network active speaker total output volume of broadcasting0~15,6
grade is 0dB
）
Audio priority
It can select local and network priority, the default is network priority.
Network priority: IP broadcast>PTT broadcast>ling input
；
local priority
：
line
input>IP broadcast>PTT broadcast
Power amplifier normally
open
Power amplifier normally on-off or power amplifier open configuration, it
defaults to normally on-off.
Normally on-off: when receiving server broadcast or line input audio,
8
