16
www.spokey.eu
www.spokey.pl
PLACING THE TREADMILL, SCOPE OF USAGE
The treadmill should be placed in a dry place, and not exposed to the
stream of water and moisture. The treadmill should be placed on a clean
and flat surface. Placing the treadmill on an uneven surface can cause
damage to its system. You cannot place the treadmill on a carpeted or floor
covering.
THE TREADMILL IS INTENDED FOR INDOOR USE ONLY.
This equipment may not be exposed to an aerosol spray or oxygen.
Moreover, it may not be placed in areas where gas is used due to possible
sparks coming out of the engine.
The treadmill should be placed at a distance of about 2 m from walls and
objects that may be dangerous to the user.
The security area of 2 x 1 m must be left behind the exercise machine.
Treadmill exercises replace walks and jogging. The treadmill is intended
for home use only and it is not designed for any therapeutic or rehabilitation
purposes.
The device is not designed for a long-term operation or any commercial
activities.
YOUR BODY POSITION
Get onto the treadmill belt; you can rest your hands on the handrails. While
doing your exercises, you should have your back straight. On the treadmill,
you can perform exercises which replace walks or jogging (see figure).
Any injuries may result from incorrect or intensive training.
NOTE: You should keep your hands away from moving parts.
Adherence to the following TRAINING CYCLE will bring many benefits to your health, such as physical fitness, muscle development and weight loss - in
conjunction with the calorie intake control.
WARM-UP STAGE
This step guarantees a proper flow of blood through the body systems, as
well as it ensures the correct work of your muscles. Warming up reduces
the risk of contraction and muscle damage. It is recommended to do a few
stretching exercises as set out in the figures set out below. Each position
should be maintained for about 10-15 seconds. Do not strain or pull
muscles during your exercises. If you happen to experience any pain, you
should stop immediately.
Repeat every exercise several times.
STARTING THE EXERCISE
Stand on the foot rail. Next, set the speed to the lowest possible value.
The next step is stepping onto the running belt and setting the desired
speed
TRAINING STAGE, RELAXATION
This stage requires your effort. In time, with regular training, your leg
muscles become more flexible. You should exercise at your own pace, but
it is important to constantly keep the same speed.
Relaxation
allows you to restore a normal heartbeat and “cool down” your
muscles. This stage is a repetition of the warm-up and it should be
continued for about 5 minutes. Please repeat the stretching exercises,
remembering not to strain your muscles. It is recommended to train at least
three times a week.
HOW TO GET OFF THE TREADMILL
a) standard stopping procedure
Press the STOP button.
Attention: Wait till the running belt is completely still. Next, remove the
safety key and press the main switch.
b) emergency method
In order to get off the treadmill as a result of the equipment malfunction or
your health problems, please slow down your running speed gradually. You
can get off the treadmill when the belt stops running. You can also use the
security key.
NOTE: Always after finishing your exercise session on the treadmill,
disconnect the treadmill from the power source.
USAGE
TRAINING MANUAL
The equipment label depicting a crossed-out wheeled bin symbol informs that it is forbidden to dispose of waste electrical and electronic equipment together with other types of
waste. In accordance with the WEE directive on waste electrical and electronic equipment, separate waste management processes should be applied for this type of equipment.
The user who intends to dispose of such a product is obliged to return it to an electronic equipment collection point thanks to which they can contribute to its re-use, recycling,
and recovery and, in this way, protect the environment. To do this, contact the sales point where the equipment was purchased or a representative of the local authorities.
Hazardous substances included in electronic equipment can have negative long-term influence on the natural environment and they can also have negative effect on human
health.
