SPmoto Motorcycle User Manual Download Page 11

Page: 11 / 92

Not wearing a helmet increases the

chance of serious injury or death in a
crash.

Safety Precautions

●

Ride cautiously and keep your hands on the

handlebar and feet on the footpegs.

WARNING

Gloves
Full-finger leather gloves with high abrasion
resistance

Boots or Riding Shoes
Sturdy boots with non-slip soles and ankle
protection

Jacket and Trousers
Protective, highly visible, long-sleeved jacket
and durable trousers for riding (or a protective
suit).

●

Always consider the safety of

other drivers

and riders.

Protective Apparel

Make sure that you are wearing an approved
motorcycle helmet, eye protection, and high-
visibility protective clothing. Ride defensively in
response to weather and road conditions.

Helmet

Safety-standard certified, high-visibility, correct
size for your head

●

Must fit comfortably but securely, with the

chin strap fastened

●

Face shield with unobstructed field of vision

or other approved eye protection

Make sure that you always wear an

approved helmet and protective apparel.

Summary of Contents for Motorcycle





























































































Search results

Summary of Contents for Motorcycle

Reviews:

SPmoto Motorcycle, User Manual, Page: 11 / 92

Search results

Summary of Contents for Motorcycle

Reviews: