TECHNICAL SPECIFICATIONS
IMPORTANT SAFETY INSTRUCTIONS
WARNING – TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO
PERSONS OBSERVE THE FOLLOWING:
•
Use this unit only in the manner intended by the manufacturer. The manufacturer is not responsible for
any damages caused by misuse or defective installation.
The instructions contained within the installation Template must be followed carefully when installing
this unit. Failure to accurately follow the instructions may result in the incorrect operation of this unit,
damage to property and/or personal injury.
Installation work and electrical wiring must be done b
y qualified person(s) in a
ccordance with all
applicable codes and standar
ds, including fi
re-rated construction.
When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities.
This unit must be powered by a dedicated circuit branch protected by a circuit breaker with the
appropriate rating. Cir
cuit cable must be fit cur
rent consumption for this unit.
This unit has been designed for indoor use only, protect from water, sun and extreme temperatures, do
not install it outdoors or close to moisture and heat generators.
This unit can only be revised, maintained, repaired and removed b
y qualified person(s).
If the unit stops and works strangely, contact your regional dealer or contractor.
This appliance can be used by children aged from 8 years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and understand the hazards involved. Do not
allow children to play with the appliance or carry out cleaning and user maintenance on this hand dryer.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly
qualified persons in o
rder to avoid a hazard.
•
•
•
•
•
•
•
•
⚠
3
EN
Standard mode
Quiet mode
Power
12W
Operating cycle
1 hour on, 1 hour off
Air speed
17m/s
Performance Data
Item Category
Drying Time
10 ~ 12 sec
Drip Proof
Isolation
Unit Size
IPX3
CLASS I
H 322.1mm x W 270.5mm x D 144.6mm
Sensor Type
Auto Infrared touch free operation
Sensor Range
45° 10~20cm
Timing Protection
50 seconds auto shut off
Standby Power
≤
0.5 W
Air Speed
(
sensing max
)
96 m/s
Motor Type
Brushless DC Motor, 30,000 RPM
Operating Voltage
Power
AC 220~240 V, 50 Hz / AC 110~120, 60Hz
320 W
(Heater off)
/ 720 W
(Heater on)
Q mode 'ON' , 130 W
(Heater off)
/ 530 W
(Heater on)
Sterlilization mode
220~240 V
110~120 V
320 W
(Heater off)
/ 820 W
(Heater on)
220~240 V
110~120 V
Q mode 'ON' , 130 W
(Heater off)
/ 630 W
(Heater on)
（
Applicable only for PEBBLE PLUS model)
