background image

17

Security Advices

Connections

Only use the connections as described. Other connections can lead to health risks and 
damage the equipment.

Water and humidity

Do not use this device anywhere near water (for example in a bath room, a damp  cellar, 
near  swimming  pools,  or  similar  environments).  Otherwise  your  are  dealing  with  an 
extremely high risk of fatal electrical shocks!

Insertion of objects or fluids

Be careful to not insert any object into any of the chassis openings. You can otherwise 
easily come into contact with dangerous voltage or cause a damaging short circuit. Never 
allow any fluids to be spilled or sprayed on the device. Such actions can lead to dangrous 
electrical shocks or fire!

Ventilation

The vent openings on the unit are meant to avoid the Gemini from overheating. You should 
never cover nor block these openings. 

Power Supply

Power the unit exclusively with the voltage rating specified on the unit. In case of doubt, 
contact your local dealer or electric provider. Disconnect the unit from the electric power 
grid if you are not going to use it for a long period of time. Unplug the power chord from 
the mains to cut power supply to the unit. Always make sure that the mains plug is easily 
accessible.

Opening the unit

Simply put: DON‘T, if you are not a certified SPL technician or engineer. Really: Do not 
open the device housing, as there is great risk you will damage the device, or – even after 
being disconnected – you may receive a dangerous electrical shock!

Cord protection

Make sure that your power and audio signal cords are arranged to avoid being stepped on 
or any kind of crimping and damage related to such event. Do not allow any equipment or 
furniture to crimp the cords. Power connection overloads: Avoid any kind of overload in 
connections to wall sockets, extension or splitter power cords, or signal inputs. Always 
keep manufacturer warnings and instructions in mind. Overloads create fire hazards and 
risk of dangerous shocks! 

Lightning

Before thunderstorms or other severe weather, disconnect the device from wall power; 
do not do this during a storm in order to avoid life threatening lightning strikes. Similarly, 
before any severe weather, disconnect all the power connections of other devices and 
antenna  and  phone/network  cables  which  may  be  interconnected  so  that  no  lightning 
damage or overload results from such secondary connections.

Summary of Contents for Gemini 1720























Reviews: