2
BiG – 500 series
BiG – 500 series
3
Introduction
Developer
Wolfgang Neumann
Version 1.0 – 05/2022
This manual contains a description of the product. In no way it represents a guarantee
of particular characteristics or results of use. The information in this document has
been carefully compiled and verified and, unless otherwise stated or agreed upon,
correctly describes the product.
Specifications are subject to change without notice.
Specifications
General
Frequency range (-3 dB):
10 Hz - 100 kHz
Common mode rejection (1 kHz, 0 dBu ):
> -82 dBu
THD + N (0 dBu):
0.03%
Noise (A-weighted):
92.3 dBu
Dynamic range:
113 dB
Input (balanced)
Impedance:
20 kohms
Maximum input gain:
+21 dBu
Output (balanced)
Impedance:
150 ohms
Maximum output gain:
+21 dBu
Scope of Delivery
BiG module, 500 series
Manual
Measurement & Weight
Double-slot module, series 500
Weight: 1.98 lbs (0.9 kg)
Please keep the original packaging. In a service case the original packaging ensures a
safe transport.
Installation
Installation into a 500 series rack:
• Please read the manual that comes with the 500 series rack. You should receive all
necessary information for the installation process.
• For the installation or exchange of BiG, your 500 series rack should be switched
off and the power cable should not be connected.
• Insert the BiG module into two adjacent free slots of your rack. Make sure the con-
nectors of the BiG is precisely aligned with the rack connectors.
• Press the BiG module carefully into the rack connectors and tighten the screws.
• Connect the BiG module with your audio environment using the connections from
your 500 series rack.
• Insert the power cable to the 500 series rack and switch it on.
EN
DE
