H y d r a u l i c
R o t a r y H a m m e r D r i l l
2 2 4 1 8 0 0 1 0
M a s c h i n e n f a b r i k G m b H
Spitznas Maschinenfabrik GmbH, Fellerstr.4, D-42555 Velbert, Tel: +49(0)2052 605 0, Fax: +49(0)2052 605 29
, www.spitznas.de
Translation of the original operation
manual, compiled: 12.09.13
224180010_BA_en_Version_06
Page 11 of 11
Spare Parts and Accessories
Only original spare parts may be used. There is no warranty for damages and liability is
disclaimed, if non-original spare parts and accessories are used.
The repairing of the machine is allowed authorized expert companies only.
The accessories applicable with our machine are listed in our brochure.
Troubleshooting
Problem
Cause
Remedy
a
Machine does not
start
No hydraulic connection
Connecting and opening of the
hydraulic line
Correct connection of hoses
b
Machine rotates too
slowly
Operating pressure too low
Increase operating pressure (on the
machine) to 140 bar
c
Gearbox makes strong
noise
Contact authorized expert company
d
Other problems
Contact authorized expert company
D e c l a r a t i o n o f C o n f o r m i t y
as defined in the European Union Machine Directive 2006/42/ EC
for usable machines
We, the company
SPITZNAS Maschinenfabrik GmbH, Fellerstraße 4, 42555 Velbert– Langenberg,
declare that the following product
Description:
Hydraulic Hammer Drill
Model :
2 2418 0010
complies with the provisions of the European Union Machine Directive 2006/42/ EC
and conforms to the following standards or standardized documents:
DIN EN ISO 12100
DIN EN ISO 11148-5
Name of the authorized person for documentation: Mr. Simon Witt
Address of the authorized person for documentation: see manufacturer’s address
42555 Velbert, 11.02.13
