P n e u m a t i c
C o r n e r D r i l l
2 1 7 0 1 0 0 0 0 / 0 0 1 0 / 0 0 3 0
M a s c h i n e n f a b r i k G m b H
Spitznas Maschinenfabrik GmbH, Fellerstr.4, D-42555 Velbert, Tel: +49(0)2052 605 0, Fax: +49(0)2052 605 29
, www.spitznas.de
Compiled: 21.01.10
21701000_0010_0030_en_Version_00.do
c
Page 4 of 22
SAFETY INSTRUCTIONS
Any power tool can be dangerous.
These safety precautions are given for your safety. Review them carefully before operating
the machine and before performing maintenance and repairs.
Wear safety glasses (Danger of injury by means of metal chips).
Wear safety gloves (Danger of injury by cutting oneself on sharp-edged work
pieces).
Wear safety shoes.
Wear protective clothing (Protect your head and hair, eyes and ears, hands and
feet).
Ensure that you maintain a good footing and proper balance at all times.
Never work under the influence of alcohol, drugs or stronger medication.
After use, shut valve immediately.
Disconnect machine from the air line (Avoidance of unintentionally turning on the
machine)
Follow the general current and appropriate Accident Prevention and Safety
Procedures.
Switch off the machine before laying aside.
Avoid sparks in hazardous environment – created by the drill. During use,
material and drill always have to be flushed with sufficient water for cooling.
Keep your working area clean and uncluttered. Maintain a proper footing and
balance at all time. Never work with the machine while standing on a ladder or
leaning against a scaffold.
Never hold the machine only by hand during drilling.
ATTENTION! Never use the flexible hose as a lifting handle!
Your safety is in your hands.
Keep these instructions.
