TROUBLESHOOTING
FAULT
CAUSE
REMEDY
The motor does not
start when switch is
activated
Plug is not connected
Check the plug
Power cord is damaged
Contact authorised service person / agent
No power supply
Contact an authorised electrician to check
power supply
Switch faulty
Contact authorised service person / agent
The motor is noisy
Contact authorised service person / agent
Reduced suction
Suction hose / ext tube /
nozzle blocked
Check and clean / replace as necessary
Recovery tank is full
Empty recovery tank
Head not fitted correctly
or drain hose open
Check and adjust as necessary
Reduced water spray
Filter clogged/damaged
Check and clean/replace as necessary
Spray nozzle clogged
Check and clean/replace as necessary
Solution tank empty
Refill tank
Pump faulty
Contact authorised service person / agent
NOTE: If the fault cannot be identified or corrected using the above list (or remedy states contact
Authorised service person / agent) stop using the machine immediately and contact an authorised
service person / agent to rectify the fault.
Summary of Contents for Vacstorm M9
Page 1: ...Extraction Cleaners...
