23
TROUBLESHOOTING GUIDE
FAULT
CAUSE
REMEDY
Pump is running but does not
reach rated pressure
Pump sucking air
Check hose / fittings for leaks
Nozzle is blocked
Remove and clean nozzle
Water filter dirty
Check and clean water filter
Fluctuating pressure
Pump sucking air
Check hose / fittings for leaks
Water filter dirty
Check and clean water filter
Pump is noisy
Pump sucking air
Check hose / fittings for leaks
Water inlet temperature too high Reduce water temperature
Appearance of “milky” oil in
the pump
Contact Spitwater service agent
Water leaking from pump
Contact Spitwater service agent
Oil leaking from pump
Contact Spitwater service agent
Engine does not start/operate
correctly
Refer to engine instruction book Contact Spitwater service agent
For all PETROL ENGINE specific troubleshooting, refer to the enclosed HONDA manual.
TROUBLESHOOTING GUIDE
If the fault cannot be identified or corrected using the below list (or remedy suggests contacting
Spitwater service agent) stop using the unit immediately and contact your authorized Spitwater
service agent to rectify.
TABLE-C: Troubleshooting guide
For service of your Spitwater high pressure cleaner within Australia, call 1800SPITWATER or
visit www.spitwater.com.au for further contact details.
