15
1. Inspect the unit every day to confirm that it is safe
and in proper working order before putting it into
service. Follow the
“DAILY INSPECTION
CHECK LIST”
in the SERVICE / CARE section
as a guide. If the unit is damaged or faulty in
anyways, DO NOT use it and immediately contact
your authorized Spitwater service agent for
advice.
TO START
1. Always wear appropriate Personal Protective
Equipment. (PPE)
2. Turn the isolator switch to ON position.
3. Turn the engine switch to the START position,
and hold it there until the engine starts. When
the engine starts, release the engine switch,
allowing it to return to the ON position.
NOTE:
•
If the engine fails to start within 5 seconds,
release the engine switch and wait at least 10
seconds before operating the starter again.
•
Using the electric starter for more than 5
seconds at a time will overheat the starter motor
and can damage it.
COLD START
1. To start a cold engine, pull the choke knob to
the CLOSED position and follow the regular
engine start procedure. (Point-3)
2. After engine start, warm up the engine for 2 or
3 minutes.
3. Gradually push the choke knob to the OPEN
position as the engine warms up.
GENERAL PRE-START CHECK
OPERATING INSTRUCTIONS
ON
OFF
Refer HONDA instruction booklet enclosed
for detailed cold start information.
