13
9. NOZZLE ASSEMBLY
Connect the high pressure nozzle (smaller hole) and the low pressure nozzle (larger hole) to the lance. Do
not over tighten and make sure that the nozzle positions do not interchange during assembly. Add nozzle
shield after nozzle assembly. Refer diagram below.
10. LANCE, TRIGGER GUN & HIGH PRESSURE HOSE ASSEMBLY
•
Connect the lance to the spray gun by an in-built quick release coupling.
•
Connect the high pressure hose fitting to the spray gun. Do not over tighten.
•
Connect the quick release adaptor to the high pressure hose fitting. Do not over tighten.
