13
11. WATER INLET CONNECTION
•
Connection to potable water mains can be achieved by using a general garden hose set (1/2 inch
diameter).
•
Connect the water supply hose to the water inlet connection. In case of poor water quality the use of
an external water filter is recommended. Contact your Spitwater agent for advice and /or supply.
•
Make sure the water supply temperature and pressure meet the values specified in the technical data,
then turn the water supply on. Visually check for leaks and contact your Spitwater service agent if
found.
•
Open the water supply and check for any leaks.
•
Water that has flowed through backflow preventer is considered to be non-potable (non-drinkable).
•
For suction supply / non-pressure water supply, other than potable water mains, contact your
authorized Spitwater service agent for advice.
12. Remove the PETROL tank cap and fill the petrol tank with clean filtered petrol.
ONLY USE CLEAN
PETROL IN THIS UNIT
, as using any other fuel will create a risk of explosion and damage to the unit.
WARNING:
•
This high pressure cleaner is only
allowed to be connected with the
drinking water mains, when an
appropriate backflow preventer has
been installed, as per AS/NZS
60335.2.79.
•
Follow all local standards and
regulations applicable to water
connection.
