Spitwater 11-140P Operating And Maintenance Manual Download Page 4

 

4

IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS 

 

This booklet contains important information for the use and safe operation of this high pressure cleaner. Read and understand all 
warnings before you start using the unit. 
WARNING: When using this high pressure cleaner: 
1.

 

Read all instructions before using this high pressure cleaner (Including the engine instructions booklet). 

2.

 

Know how to start and stop the unit and bleed pressure quickly. Be quite familiar with the controls. 

3.

 

Follow the maintenance and faultfinding procedures outlined in this manual. 

4.

 

Keep operating area clear of all persons. 

5.

 

To prevent fire hazards, do not use near inflammables such as: gasoline, grain dust, solvents, thinners etc. 

6.

 

Stay alert  and hold the lance strongly as high pressure cleaner jets produce a strong reaction force 

7.

 

This unit is not to be operated by children, teenagers or impaired persons (ie. people under the influence of drugs, 
alcohol etc). 

8.

 

Do not overreach or stand on unstable supports. 

9.

 

To reduce the risk of electric shock/damage do not aim the water jet onto the unit or any other electrical part and 
always wear rubber-soled footwear when operating the unit. 

10.

 

Keep the unit in a dry building where there is no danger of freezing. 

11.

 

Do not exceed the maximum temperature and pressure indicated in the technical data. 

12.

 

Never aim the jet in the direction of human beings, because the water jet comes out of the nozzle at high speed with 
high pressure. 

13.

 

Do not pull on high-pressure hose in order to move the unit. 

14.

 

Use only high-pressure hoses supplied by Spitwater Australia. In the case of defects, never try to bind up defective 
hoses, replace them. 

15.

 

Do not work in the rain or during thunderstorms. 

16.

 

When the unit is working, do not cover and do not place in a closed space where ventilation is insufficient. 

17.

 

Do not operate this unit in enclosed spaces. 

18.

 

Do not leave the unit running unattended. If unit is not required please switch it off. 

19.

 

When finishing work, always secure the handpiece with the lock catch. 

20.

 

To prevent injuries always turn the machine off before disassembling any part of the unit or effecting any servicing 
and before leaving the machine. 

21.

 

All serious servicing and maintenance procedures should be carried out by an authorised service person using spare 
parts supplied by Spitwater Australia. 

22.

 

Local regulations and standards as to the installation and operation of high-pressure cleaners must be observed. 

 

WARNING: RISK OF INJECTION OR INJURY - DO NOT DIRECT HIGH PRESSURE JET STREAM AT PERSONS 

 

SAVE THESE INSTRUCTIONS 

 

READ WITH ATTENTION THE WARRANTY CARD AND MAIL COPY ON THE DATE OF SALE 
 
 

Summary of Contents for 11-140P

















Reviews: