Spitwater 11-140P, Operating And Maintenance Manual, Page: 3 / 16

3
TECHNICAL DATA
INTRODUCTION
The SPITWATER range of high pressure cleaners has been designed to give safe, efficient and reliable service. Like any other
piece of equipment; however, the unit will only operate at maximum efficiency if the correct operating sequences are followed and
proper attention is given to the maintenance procedures.
The purpose of this manual is to provide up to date information necessary to the user for operating, maintaining and servicing the
unit, together with fault finding techniques and general specification details and diagrams. The information given, however, may be
subject to revision in compliance with the policy of continual improvements.
HEALTH AND SAFETY AT WORK
Manufacturers and suppliers of products for use in the workplace have a duty to ensure, so far as is reasonably practicable, that
such products are safe and without risk to health when properly used and to make available to users of such products adequate
information about their safe and proper operation.
The SPITWATER range of high pressure cleaners should only be used in the manner and purpose for which they were intended
and in accordance with the recommendation detailed in this Manual and in any other Government Standard applicable in your
country. Our units have been designed, produced and inspected with safety in mind; however, there are certain basic precautions
which should be taken by the user and in particular, attention is drawn to the safety precautions in this Manual and in the Operating
Instruction stickers on the unit itself.
It is imperative therefore, that all persons who may make use of this unit, have all the information and instructions they require to
ensure that they are fully aware of the hazards and they know both the purpose and correct manner of operation of our pressure
cleaners.
Model
8-140P 11-140P 13-200P 15-250P HP152/A HP251/A HP251/AE HP201SAE HP251SAE HP3523AE
Flow Rate
L/M-L/H 8-480 11-660 13-780 15-900 12-720 15-900 15-900 21-1260 21-1260 23-1380
Pressure Working Bar-Psi 140-2100 140-2100 200-3000 250-3650 150-2250 250-3650 250-3650 200-3000 250-3650 350-5000
EWE Rotojet Bar-Psi 185-2775 185-2775 255-3825 300-4500 195-2925 300-4500 300-4500 255-3825 300-4500 400-6000
Max Inlet Pressure Bar-Psi 10-150 10-150 10-150 10-150 10-150 10-150 10-150 10-150 10-150 10-150
Temperature
0
C
50 50 50 50 50 50 50 50 50 50
Pump Motor Power kW-HP 4.1-5.5 4.1-5.5 6.6-9 9.6-13 4.8-6.5 9.6-13 9.6-13 9.6-13 13.4-18 18-24
Make HONDA HONDA HONDA HONDA HONDA HONDA HONDA HONDA HONDA HONDA
Tank Capacity L 4.3 4.3 6 6.5 3.6 6.5 6.5 6.5 11 11
Petrol Type Unleaded Unleaded Unleaded Unleaded Unleaded Unleaded Unleaded Unleaded Unleaded Unleaded
Starting System Pull Start Pull Start Pull Start Pull Start Pull Start Pull Start Electric Start Electric Start Electric Start Electric Start
Protection Oil Guard Oil Guard Oil Guard Oil Guard Oil Guard Oil Guard Oil Guard Oil Guard Oil Guard Oil Guard
Pump
Model TT1511 UH2013 WS251 W140 WS251 WS251 WS202 WS252 W3523
Rpm 3400 3400 3400 1450 1450 1450 1450 1450 1450 1450
Oil Capacity l 0.33 0.4 1.2 0.4 1.2 1.2 1.2 1.2 1.2
Oil Type SAE 20-30 20-30 20-30 20-30 20-30 20-30 20-30 20-30 20-30 20-30
Hose Length
3
/
8
M 8 8 8 10 10 10 10 10 10 10
Dimension L x W x H mm. 500X490X940 500X490X940 600X580X1040 920X630X860 790X535X723 920X630X860 920X630X860 920X630X860 985X750X950 985X750X950
Weight kg 34 34 51 83 51 83 83 97 114 118
The Manufacturer reserves the right to modify design features and technical data without notice