13
12. WATER INLET CONNECTION
•
Connection to potable water mains can be achieved by fitting a general garden hose (1/2 inch
diameter).
•
Connect the water supply hose to the water inlet connection. In case of poor water quality the use of an
external water filter is recommended. Contact your Spitwater agent for advice and /or supply.
•
Make sure the water supply temperature and pressure meet the values specified in the technical data,
then turn the water supply on. Visually check for leaks and contact your Spitwater service agent if
found.
•
Open the water supply and check for any leaks.
•
Water that has flowed through backflow preventer is considered to be non-potable (non-drinkable).
•
For suction supply / non-pressure water supply, other than potable water mains, contact your
authorized Spitwater service agent for advice.
WARNING:
•
This high pressure cleaner is only
allowed to be connected with the
drinking water mains, when an
appropriate backflow preventer has
been installed, as per AS/NZS
60335.2.79.
•
Follow all local standards and
regulations applicable to water
connection.
