29
We recommend powering the motor with
two 2S LiPo batteries of about 1800 to
2200 mAh, connected in parallel. Install
the packs between frames 2 + 3, and
secure them with hook-and-loop tape. The
boat's Centre of Gravity is 130 mm
forward of frame 1.
130 mm
30
The motor must be aligned in such a way that the centre of
the propeller is exactly level with the rear hull bottom. You
will find a detailed description of setting up the boat in the
Appendix entitled “Trimming”.
Assemble the boatstand from
parts 55 + 56 and glue the joints;
note that the small projecting tabs
of parts 56 face up; the flat rear
part of the model's hull bottom
rests on the stand.
The final stage is to install the receiver and speed controller. When you have checked everything one last time,
you can safely take the boat to the water. Please be cautious when opening the throttle: sudden changes in
throttle could cause the Spitfire to flip over.
2S Lipo
2S Lipo
1
55
55
56
56
31
32
Summary of Contents for Aeronaut
Page 12: ......
