1.
8.
7.
6.
2. 3. 4. 5.
PAGE 13
PHOBOS - USER MANUAL
M A S T E R C O N T R O L S
The master controls section is split on the left and right hand side of the interface. These controls affect the entire instance of the
plugin and / or preset.
1. PRESET BROWSER
As shown before, this is where you get to browse through the
awesome array of presets we’ve prepared for you. Use the ar-
rows to skip through them incrementally.
ON SAVING YOUR OWN PRESETS.
USE YOUR DAW’S PRESET SAVING SYSTEM.
In this screen grab Christian is saving his new preset ‘Sheffield
‘78’ in Logic
2. SETTINGS
Phobos is a clever beast. When you boot up it checks out your
system and optimises itself accordingly, so you get the very best
out of this revolutionary synth. If you click on settings you can
check out what it has set itself to and tweak if you want.
3. ABOUT
Contains our end user license agreement as well as a link to our
webpage, containing this very manual!
4. LFOS
Contains all the settings for the LFOs that can be assigned in
the modulation mappings. All the LFO frequencies are locked
to your host tempo for ease of use with various adjustments
that can be made to also help throw them off the grid! See the
“Global LFO Controls” chapter to delve deeper.
5. MPE MODE
This is a toggle button that enables or disables MPE (Multidi-
mensional Polyphonic Expression) support for devices such as
the Roli RISE or Roger Linn LinnStrument.
GAIN
Or trim, or even volume! This sets the overall output of the
plugin.
PITCH
Turn the dial to coarse tune by semi (half) tones. Press shift then
move the knob to fine tune by cents.
MIDI CHANNEL
This sets the channel that the plugin recieves at. In most circum-
stances channel 1 is a standard default for your DAW.
NB It is advised that you keep this in channel 1 when using MPE as
this defines the MPE master channel. Obviously if your MPE device
has a different MPE master channel, adjust Phobos accordingly.
