3
2
TECHNICAL SPECIFICATIONS
Power
Voltage
Frequency
Current
No load speed
Full load speed
Grinding disc
Length machine
Machine net weight
Machine general weight
Noise/vibration information
Noise (Lpa)
91 dB
Noise (Kpa)
3 dB
Noise (Lwa)
102 dB
Noise (Kwa)
3dB
Hand-arm-vibrations
3.2 m/s²
Hand-arm-vibrations (K)
Confirmation declaration
We declare in sole responsibility that the product type Spit DWS 225 referred to in this
declaration conforms to the following standards and further normative documents.
We declare under our sole responsibility that this product is in conformity with the
following standards or standardization documents:
EN 60745-1: 2006
EN 60745-2-4: 2003+A11: 2007
EN 55014-1: 2000+A1: 2001+A2: 2002
EN 6100-3-2: 2000+A2: 2005
EN 6100-3-3: 1995+A2: 2005
EN 55014-2: 1997+A1: 2001
3
FUNCTIONAL DESCRIPTION
This Spit drywall sander DWS 225 is specially designed for the most efficient sanding of
drywall or plaster walls and ceilings for both new construction and renovation work.
It is designed to work in conjunction with the Spit vacuum cleaner AC 1600 for minimum
dust and best sanding results. The pivoting sanding head allows excellent results with
minimum time and effort.
Electrical connection
The network voltage must conform to the voltage indicated on the nameplate of the tool.
Under no circumstances should the tool be used when the power supply cable is
damaged.
A damaged cable must be replaced immediately by an authorized Spit Service Center.
Do not try to repair the damaged cable yourself. The use of damaged power cables can
lead to an electric shock.
Extension cable
If an extension cable is required, it must have a sufficient cross-section so as to prevent
an excessive drop in voltage or overheating. An excessive drop in voltage reduces the
output and can lead to failure of the motor. The following table shows you the correct
cable diameter as a function of the cable length to this machine.
Cable length
in m²
Rated current under load (ampere)
0,2
2.1 - 3.4
3.5 - 5
5.1 - 7
7.1 - 10
10.1 - 16
7.5
1,5
1,5
1,5
2,5
2,5
4.0
15.0
1,5
1,5
1,5
2,5
2,5
4.0
22.5
1,5
1,5
1,5
2,5
2,5
4.0
30.0
1,5
1,5
1,5
2,5
2,5
6.0
60.0
1,5
1,5
1,5
2,5
4.0
6.0
90.0
1,5
2,5
2,5
4.0
4.0
8.0
Table 1
Conductor cross-section - cable 2 x mm²
Unpacking
Carefully remove the tool and all loose items from the shipping container.
Retain all packing materials until after you have inspected and satisfactorily operated
the machine.
GB