background image

User manual - 1.2

English

23

English

User manual

TABLE OF CONTENTS

/i

1

PREFACE

This user manual involves the installation, commissioning 
and operation of the SpiroVent Superior of the types S6A, 
S6A-R and S6A-R 2P.

Always carefully read the instructions before installation, 
commissioning and operation. Keep the instructions for 
future reference.

All rights reserved. No part of this manual may be 
duplicated and/or made public through the Internet, by 
means of printing, photocopying, microfilm or in any 
other way without prior written permission from 
Spirotech bv.
This manual has been composed with the utmost care. 
Should, however, this manual contain any inaccuracies, 
Spirotech bv cannot be held responsible for this.

1.1

Symbols

Throughout the instructions the following symbols are 
used:

1

Preface

23

2

Introduction

24

3

Technical specifications

26

4

Safety

28

5

Installation and commissioning

29

6

Use

35

7

Failures

36

8

Maintenance

40

9

Guarantee

42

10 CE statement

42

Warning or important note

Note

Risk of electric shock

Risk of burning

OBJ_BUCH-45-001.book  Page 23  Tuesday, June 14, 2011  10:56 AM

Summary of Contents for SpiroVent Superior S6A









































Reviews: